Derek McCormick’s Violin Blog

Making a violin and other violin-related topics

Fitting the Upper and Lower Ribs

(A)  The C-bout ribs have been planed down to final height and the corner blocks carved to receive upper and lower ribs. It is important to achieve a tight fit between blocks and ribs.

(A) The C-bout ribs have been planed down to final height and the corner blocks carved to receive upper and lower ribs. It is important to achieve a tight fit between blocks and ribs.

The bending iron has been used to shape the upper bout ribs..

(B) The bending iron has been used to shape the upper bout ribs.

Upper ribs glued and clamped in position. The hot hide glue is in the saucepan to the left.

(C) Upper ribs glued and clamped in position. The hot hide glue is in the saucepan to the left.

All ribs have been fitted and finished. A slight taper is built into the rib structure - the height at the bottom block is 31mm, reducing gradually to 29mm at the top block.

(D) All ribs have been fitted and finished. A slight taper is built into the rib structure - the height at the bottom block is 31mm, reducing gradually to 29mm at the top block.

Advertisements

October 26, 2008 - Posted by | (03) Fitting Upper and Lower Ribs

No comments yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: