Derek McCormick’s Violin Blog

Making a violin and other violin-related topics

Fitting “C bout” ribs.

The ribs (sides) are initially sawn to a thickness of about 2-3mm. They need to be thinned to about 1mm and this is achieved by using a high angle block plane followed by a scraper which gives the final smooth finish.

The ribs (sides) are initially sawn to a thickness of about 2-3mm. They need to be thinned to about 1mm and this is achieved by using a high angle block plane followed by a scraper which gives the final smooth finish.

The thinned ribs are bent to conform to the shape of the C-bouts using an electrically heated bending iron and a metal strap.

The thinned ribs are bent to conform to the shape of the C-bouts using an electrically heated bending iron and a metal strap.

The willow corner blocks have been carved to match the curve of the C-bout and the ribs have been glued and clamped in place.

The willow corner blocks have been carved to match the curve of the C-bout and the ribs have been glued and clamped in place.

Advertisements

October 25, 2008 - Posted by | (02) Fitting C-bout Ribs | , ,

No comments yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: